Are You Required To Register Users For Symantec Endpoint Encryption

This article is intended as a guide using footstep-by-step instructions on individual machines where the Windows update is installed manually (via setup.exe or deployment solutions).  These steps can be adapted to many different scenarios as long as the options being used are supported by Windows.  As was mentioned in the Introduction, steps for SCCM are available, and if automatic updates are existence performed, there is no need to go through any special steps.  These steps are if you would like to install the Windows update manually.

Refer to the Organisation Requirements folio for official certification information:
Symantec Endpoint Encryption Client, version 11.3.x - System Requirements

Symantec Endpoint Encryption Client, version 11.two.ten - Organization Requirements

Windows 10 has ii types of updates

• Feature Updates (Major), which alter the cadre version of Windows
• Cumulative updates (Incremental), which do not alter the core version of Windows

Examples of these major updates are as follows:

Windows 11 October 2021 Update (version 21H2 - Encryption Certification Pending )
Windows 10 May 2021 Update (version 21H1)
Windows 10 October 2020 Update (version 20H2)
Windows 10 May 2020 Update (version 2004 - 20H1)
Windows 10 November 2019 Update (version 1909 - 19H2)
Windows 10 May 2019 Update (version 1903 - 19H1)
Windows ten October 2018 Update (version 1809 - RS5)
Windows 10 April 2018 Update (version 1803 - RS4)
Windows ten Autumn Creators Update (version 1709 - RS3)
Windows 10 Creators Update (version 1703 - RS2)
Windows 10 Anniversary Update (version 1607 - RS1)

Method ane (Automatic/Seamless) - Steps with Come across xi.3.0 and higher up (Recommended Process to follow):
Symantec Endpoint Encryption 11.3.0 take seamless Windows 10 upgrade functionality already set by default.

If systems are upgraded from older versions, such as eleven.two.0 or older, come across sections two or 3 below for some tips using "WINSETUPAUTOMATION=i" as an upgrade option, merely otherwise, Windows 10 can be automatically updated using the "Alive Updates" or automatic updates feature with versions 11.three.0 seamlessly (No need to decrypt machines before applying a Feature Update or Cumulative Updates!

If deployment tools are existence used to deploy Windows 10 updates, see the information in this section below, merely automatic Windows 10 updates can exist provided without having to do anything to the organization and can be done automatically.

Contact Symantec Encryption Support for whatsoever aid/guidance.

________________________________________________________________________________________________
TIP i - Brand a Backup!

It is ever good exercise to backup your systems before performing upgrades or other pregnant changes to the system
________________________________________________________________________________________________

If Deployment tools such as Symantec IT Management Suite (AKA Altiris) or SCCM are being used, and you would like to manually deploy Windows 10 major updates by using the Windows setup files direct, use the string below to install the Windows 10 upgrade builds:

setup.exe /Car Upgrade /DynamicUpdate disable /reflectdrivers  "C:\Program Files\Symantec\Endpoint Encryption Clients\Drive Encryption\Os Upgrade Files" /Postoobe "C:\Plan Files\Symantec\Endpoint Encryption Clients\Drive Encryption\Bone Upgrade Files\setupcomplete.cmd

Using the above command will upgrade Windows keeping electric current files, and will not endeavour to download any updates during the upgrade.  Using other Windows install options is fully supported as long as Windows supports the options for install, such as the "/Automobile Upgrade", or "/DynamicUpdate disable" options mentioned.  This is command provided simply for convenience, simply whatsoever upgrade command supported by Microsoft is also supported by Symantec Endpoint Encryption.

**The to a higher place command assumes all the setup files are copied to the directory you are running the command from

________________________________________________________________________________________________
TIP two - Make Windows Upgrades/Feature Updates Unattended and Seamless! When applying a Windows 10 "Feature Update", which are 1 of the more major updates multiple reboots must take place.  Using SEE, unattended reboots can be accomplished by using the "Autologon" functionality so that when if a user is non around to enter the preboot passphrase, the Autologon user will take care of this automatically.  In order to do this, a command tin can be run to enable Autologon.  This is a protected functioning and and so it must be authenticated with either a passphrase, or some of the Advanced Settings, namely, the "Let Autologon Management for SYSTEM User" setting.  Using this these reboots can be performed all automatically.  For more than data on usiong this Autologon feature, run across the following article:

178697 - How to use the Autologon Utility for Symantec Endpoint Encryption version 11

________________________________________________________________________________________________
TIP 3 - Make Windows Upgrades/Characteristic Updates Unattended and Seamless!
If Symantec Endpoint Encryption eleven.two.1 MP1 or newer was already installed, but the WINSETUPAUTOMATION=1 option was not set during install, this can be set manually in the registry at any time by modifying the post-obit registry central:

HKEY_LOCAL_MACHINE\SOFTWARE\Encryption Anywhere\Hd
WINSETUPAUTOMATION=dword:1

Symantec Endpoint Encryption eleven.3.0 MP1 sets the WINSETUPAUTOMATION value to "1" by default.  As mentioned, this can too be set during an upgrade using the command higher up during an upgrade to 11.3.0 or above.

Once this has been added, restart the machine for this to take effect.
________________________________________________________________________________________________

________________________________________________________________________________________________
TIP 4 - Deploy Windows Upgrades with SCCM
For instructions on upgrading Windows 10 systems encrypted with Symantec Encryption using SCCM, see the following article:
213890 - Deploy or Upgrade Windows 10 using SCCM on systems encrypted with Symantec Endpoint Encryption.
________________________________________________________________________________________________

Method ii (Automatic when used with WINSETUPAUTOMATION=ane) - Steps with SEE xi.two.1 MP1:
Symantec Endpoint Encryption 11.2.1 MP1 and in a higher place supports Windows 10 automatic updates without the requirement of using and special upgrade scripts.  This new functionality supports Windows 10 upgrades starting with Windows ten 1607 and beyond.  If you accept systems that are older than SEE Client version eleven.3.0, delight upgrade as these older versions have reached an EOS\EOL phase.  Going forwards, 11.3.0 and above are the minimum requirements for using Symantec Endpoint Encryption.  If you take systems that are older than 11.ii.ane MP1 and need to be upgraded, apply the following install string to enable the "WINSETUPAUTOMATION" option--this is needed to ensure automatic updates are practical properly:

msiexec /i "Run into Client_x64.msi" WINSETUPAUTOMATION=1

In one case you have installed using this option and are now on 11.3.0 or to a higher place, in that location will not be a need to use this option over again as this is gear up automatically going forward and the Windows 10 automatic Feature Updates or Cumulative Updates can be washed without running any special steps, utilities, or commands.

Important Notation: Symantec Endpoint Encryption versions prior to eleven.3.0 should actually be upgraded to 11.3.0 or to a higher place (As of this writing, the current version is 11.3.1 MP1) to continue to be supported.

Method 3 (Manual Method) - Southteps with SEE 11.2.1 GA or older (Not recommended as newer versions are at present streamlined!
See Method one):

Important Note: Versions prior to SEE Client 11.three.0 should be upgraded as shortly as possible as this version has reached the EOS\EOL stage.  Symantec Endpoint Encryption 11.3.0 GA and higher up are now supported and is where all hereafter updates will be included.  Every bit of the version of this writing, the electric current version of Symantec Endpoint Encryption is 11.three.1 MP1.

If Encounter 11.2.one MP1 is not being used, the methods beneath tin can be used to update Windows.

############################################################################################################################
Everything from this point downwards in this article is provided for historical reference only.  Using the latest version greatly simplifies the upgrade procedure.
############################################################################################################################

When attempting to update from one of these major versions of Windows to some other, yous need to consider special requirements. Windows 10 systems encrypted with Symantec Endpoint Encryption 11.two tin can exist upgraded in either of the following methods.  Neither of the below options are recommended at this indicate, then see the above sections for a better fashion to upgrade:

Method 1: Use the upgrade sample scripts provided past Symantec to perform a manual upgrade without decrypting the system.

Method ii:Fully decrypt these systems, perform the Windows update. Encrypt the drive again one time the upgrade is complete.

This article describes Method 1 to perform a transmission update of the core version of Windows without decrypting the system.

This article is targeted for standalone systems or smaller environments, rather than mass deployments for large enterprises. These steps are to guide an finish-user through the process of upgrading a Windows 10 organisation encrypted with Symantec Endpoint Encryption 11.two. To view the sample upgrade scenarios and scripts for enterprise environments, see the Symantec Support Center article, Upgrading Encrypted Computers to the Windows 10 Anniversary Update or Later from Earlier Versions of Windows with Symantec Endpoint Encryption.

Prerequisites before you offset the upgrade:

• Support your system
  Note: Take a backup of your system before you perform any major alter to the system, such as a major Windows update.
• Symantec Endpoint Encryption 11.one.3 MP1 or above is installed on Windows 10 organisation.
  Notation: If Symantec Endpoint Encryption xi.2 is not currently installed, then the Symantec Endpoint Encryption 11.2 server suite can be downloaded from FileConnect. The Symantec Endpoint Encryption administrator can create a new eleven.ii client, and install information technology over the current Symantec Endpoint Encryption 11 production.
• A clean USB drive with no information on it. The information on this USB drive volition be overwritten, then make sure it is non one of your backup drives.  A sixteen GB USB drive is sufficient.
• The upgrade scripts are attached to this article in the "Download Files" department, or the lesser of this article. These upgrade scripts are copied to the system that y'all will be upgrading.
• At least ten GB of free hard drive space.

Disable Windows Sign-On ARSO feature:
In order for authentication to work properly at preboot, you need to disable the Windows ARSO feature by performing the following steps:

1. On the Windows Start menu, type "Settings".  A cogwheel icon appears, printing Enter.
2. Click on the "Accounts" icon.
3. On the left side, select "Sign-in options".
4. Roll down to the "Use my sign-in info to automatically end setting upwards my device later on an update or restart" option, and disable this option.

Note: If Settings does non announced on the Start menu and the system is joined to a domain, proceed to the next steps.

Stride-past-stride instructions to upgrade the Windows ten system:

Step i: Get to the organisation you lot want to upgrade and open the C: drive. Create the "SEE-Upgrade-scripts" folder to re-create the Symantec Encryption Upgrade scripts in this folder.

Stride 2: Download the upgrade script from this article "Win8_10_Upgrade_SEE11.two.zip"

In this case, you will exist using the "Win8_10_Upgrade_SEE11.2.zip" file.  Excerpt this zip file to the system yous will be upgrading, and copy all the upgrade files and paste them in the "SEE-Upgrade-scripts" folder.  Yous should run into the following files:

DisableARSO.reg
eedPasswordFilter.reg
Post-WinRS4-upgrade-SEE11.2-register.bat
Readme.txt
RegisterDESoftware.reg
setupcomplete.cmd
WinRS4-upgrade-SEE11.2.cmd

These are the upgrade scripts that are used in the back basis. Nonetheless, you will employ merely "WinRS4-upgrade-SEE11.2.cmd" for running the commands.

Step iii: Go to the Microsoft site to download Windows 10 at
https://www.microsoft.com/en-us/software-download/windows10

Annotation: This download provides all the needed Windows 10 files to update. These files tin can be used to perform a full or clean Windows upgrade. However, for these steps, you will use them to simply update Windows 10 to the newer version of Windows ten.

Footstep 4: Get your clean USB drive and ensure yous have plenty of space on it (16 GB)

Step 5: On the Microsoft page, click the "Download tool at present" option:

This downloads the Windows 10 installation media.  As of this writing, the Windows x April 2018 Update (version 1803) is currently available, and then the tool is chosen "MediaCreationTool1803.exe".

Double-click the "MediaCreationTool1803.exe" file, which displays a Microsoft window.

Step 6: To proceed, accept all the prompts for the license understanding.

Stride 7: Choose the selection to create the installation media on the USB drive:

Note: During the creation wizard, choose "Both" for Architecture.

Click Side by side to start the creation of the USB drive for the upgrade. This process could take a while depending on download speed, USB speed, and then on. Wait till it is complete.

Step viii: Once the USB drive has been created, take it to your Windows x system you desire to upgrade.  In this case, you lot will be updating to Windows 10 April 2018 Update (version 1803).

Step 9: Now open the C: bulldoze on your system and create a folder called "Win10-1803-upgrade-setup-files".

Step ten: Copy all of the Windows setup files from the USB bulldoze created from Step 7 to the "Win10-1803-upgrade-setup-files" folder.

On the USB drive, you should meet the following files\folders:
setup.exe, bootmgr, boot, efi, sources, back up, x64, x86

These files and folders should now exist in the c:\Win10-1803-upgrade-setup-files folder y'all just created.

Step 11: At present yous should have two folders created on the C: bulldoze

• Win10-1803-upgrade-setup-files, which contains all the Windows upgrade files from step ten
• SEE-Upgrade-scripts, which contains all the Symantec upgrade files from step 2

Footstep 12: At present you take all the needed files to perform the upgrade, open a command prompt with administrative permissions:

Click the Showtime menu, blazon "cmd", and once it appears in the list, "right-click" on it, and select "Run every bit ambassador" to ensure the commands work properly.

Step 13:On the control prompt, type the following to be at the root of C bulldoze:
cd\

Pace 14: Blazon the following to access SEE-Upgrade-Scripts:
cd SEE-Upgrade-Scripts

Footstep xv: If Symantec Encryption Desktop is likewise installed, close the awarding. Be sure to exit PGPTray.exe and any other PGP service.

Step 16: Blazon the post-obit, and press Enter:
WinRS4-upgrade-SEE11.2.cmd c:\win10-1803-upgrade-setup-files

TIP: If you type the first office of the file, and hit tab, information technology should autocomplete.

The above screenshot should reflect the control.  In one case you run this command, the Windows ten upgrade screens are displayed.  During the process, there will exist three reboots.  Authenticate the preboot screen each fourth dimension to allow the total Windows x upgrade process to complete.  The reboots happen automatically, so pay attention to the process and when you demand to upgrade. The process takes less than 30 minutes to complete, ensure that the process completes successfully, and that the system is not shut downwardly. This completes the Windows 10 upgrade.

If you get stuck while performing these steps, it is best to backtrack to see if whatever steps may have been missed. For further assistance, contact Symantec Support.

TIP: For information on how to upgrade Symantec Encryption Desktop ten systems encounter article 179262.

Keywords:
Windows x upgrade Run into
Windows 10 upgrade SEE
Upgrade Encrypted Drives
Upgrade SEE Encrypted Drives
Upgrade SEE-Encrypted Drives

Are You Required To Register Users For Symantec Endpoint Encryption,

Source: https://support.symantec.com/us/en/article.HOWTO128509.html

Posted by: bolinfliatich.blogspot.com

Share this post